|
This series of lockwashers is designed to be used with the N-000 series of locknuts for applications where smaller dimensions and lighter weight allows use in tight fitting areas and machinery which will not carry heavy operating loads. This series is a good continuation of the WT series.
|
| Identification | Bore (inches) | Outside Dia (inches) | Face Dia (inches) | Thickness (inches) | CAD |
|---|---|---|---|---|---|
| W-022 | 4.395 | 5.688 | 4.966 | 0.125 | CAD |
| W-024 | 4.801 | 6.188 | 5.378 | 0.125 | CAD |
| W-026 | 5.191 | 6.625 | 5.768 | 0.125 | CAD |
| W-028 | 5.582 | 7.094 | 6.174 | 0.125 | CAD |
| W-030 | 5.983 | 7.719 | 6.768 | 0.125 | CAD |
| W-032 | 6.389 | 8.156 | 7.174 | 0.125 | CAD |
| W-034 | 6.764 | 8.594 | 7.568 | 0.125 | CAD |
| W-036 | 7.171 | 9.000 | 7.959 | 0.125 | CAD |
| W-038 | 7.577 | 9.438 | 8.350 | 0.125 | CAD |
| W-040 | 7.982 | 9.969 | 8.834 | 0.125 | CAD |
| W-044 | 8.701 | 10.406 | 9.630 | 0.125 | CAD |
This web page and all information contained ©2024, Whittet-Higgins Co.
