MS172201-23 Lockwasher

WWH.GIF

Developed to meet the aeronautical requirements, this series is used today in many commercial applications where an extra strength lockwasher is desired to accompany the hardened nut of the MS 172236/259 series, or where smaller size and lighter weight are important in an application.

Made of AMS 6350 alloy steel, these lockwashers are finished with a phosphate treatment in accordance with AMS 2481. For best advantage use these lockwashers with the MS 172236/259 series of companion locknuts.



Identification Bore
(inches)
Outside Dia
(inches)
Face Dia
(inches)
Thickness
(inches)
CAD
MS-172201 0.406 0.828 0.551 0.044 CAD
MS-172202 0.484 0.922 0.645 0.044 CAD
MS-172203 0.601 1.094 0.770 0.044 CAD
MS-172204 0.679 1.203 0.895 0.044 CAD
MS-172206 0.989 1.562 1.208 0.054 CAD
MS-172207 1.193 1.859 1.458 0.054 CAD
MS-172208 1.396 2.078 1.676 0.054 CAD
MS-172209 1.583 2.250 1.864 0.068 CAD
MS-172210 1.792 2.500 2.082 0.068 CAD
MS-172211 1.992 2.688 2.270 0.068 CAD
MS-172212 2.182 2.953 2.520 0.068 CAD
MS-172213 2.400 3.188 2.708 0.068 CAD
MS-172214 2.588 3.375 2.895 0.068 CAD
MS-172215 2.791 3.594 3.114 0.068 CAD
MS-172216 2.973 3.922 3.395 0.068 CAD
MS-172217 3.177 4.141 3.614 0.068 CAD
MS-172218 3.395 4.359 3.832 0.068 CAD
MS-172219 3.582 4.547 4.020 0.068 CAD
MS-172220 3.800 4.812 4.239 0.068 CAD
MS-172221 3.988 5.000 4.426 0.068 CAD
MS-172222 4.192 5.188 4.614 0.068 CAD
MS-172223 4.395 5.406 4.832 0.068 CAD
MS-172224 0.801 1.375 1.020 0.044 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home