CC-S Clamp Collar

CC.GIF

Split Collars with a locking screw were an outgrowth of threaded adjustable retaining devices made and used by precision instruments and machinery manufacturers in the early twentieth century.

These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or limiters. They become an easy way to create a shoulder eliminating the need to machine expensive keyways, splines and shoulders on rods, shafts, and spindles.

This model is a One piece single slit design, made with austenitic corrosion resistant steel bright finished and austenitic stainless steel socket head cap screw.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Bore
(inches)
Outside Dia
(inches)
Face Dia
(inches)
Width
(inches)
Axial Load
(lbs)
Lockscrew
CAD
CC-02S 0.125 0.625 0.406 0.281 110 4-40 CAD
CC-03S 0.188 0.625 0.406 0.281 115 4-40 CAD
CC-04S 0.250 0.625 0.406 0.281 125 4-40 CAD
CC-05S 0.313 0.688 0.469 0.281 130 4-40 CAD
CC-06S 0.375 0.875 0.594 0.344 205 6-32 CAD
CC-07S 0.438 0.938 0.656 0.344 210 6-32 CAD
CC-08S 0.500 1.125 0.781 0.438 395 10-32 CAD
CC-09S 0.563 1.313 0.922 0.438 400 10-32 CAD
CC-10S 0.625 1.313 0.922 0.438 410 10-32 CAD
CC-11S 0.688 1.500 1.063 0.500 775 1/4-28 CAD
CC-12S 0.750 1.500 1.063 0.500 785 1/4-28 CAD
CC-13S 0.813 1.625 1.188 0.500 790 1/4-28 CAD
CC-14S 0.875 1.625 1.188 0.500 800 1/4-28 CAD
CC-15S 0.938 1.750 1.313 0.500 810 1/4-28 CAD
CC-16S 1.000 1.750 1.313 0.500 815 1/4-28 CAD
CC-17S 1.063 1.875 1.438 0.500 825 1/4-28 CAD
CC-18S 1.125 1.875 1.438 0.500 830 1/4-28 CAD
CC-19S 1.188 2.063 1.625 0.500 840 1/4-28 CAD
CC-20S 1.250 2.063 1.625 0.500 845 1/4-28 CAD
CC-21S 1.313 2.250 1.719 0.563 905 1/4-28 CAD
CC-22S 1.375 2.250 1.719 0.563 915 1/4-28 CAD
CC-23S 1.438 2.375 1.844 0.563 920 1/4-28 CAD
CC-24S 1.500 2.375 1.844 0.563 930 1/4-28 CAD
CC-25S 1.563 2.375 1.844 0.563 940 1/4-28 CAD
CC-26S 1.625 2.750 2.219 0.625 1395 5/16-24 CAD
CC-27S 1.688 2.750 2.219 0.625 1405 5/16-24 CAD
CC-28S 1.750 2.750 2.219 0.625 1415 5/16-24 CAD
CC-29S 1.813 2.875 2.344 0.625 1425 5/16-24 CAD
CC-30S 1.875 2.875 2.344 0.625 1435 5/16-24 CAD
CC-31S 1.938 3.000 2.469 0.625 1445 5/16-24 CAD
CC-32S 2.000 3.000 2.469 0.625 1455 5/16-24 CAD
CC-33S 2.063 3.250 2.719 0.750 1585 5/16-24 CAD
CC-34S 2.125 3.250 2.719 0.750 1595 5/16-24 CAD
CC-35S 2.188 3.250 2.719 0.750 1605 5/16-24 CAD
CC-36S 2.250 3.250 2.719 0.750 1615 5/16-24 CAD
CC-37S 2.313 3.500 2.969 0.750 1630 5/16-24 CAD
CC-38S 2.375 3.500 2.969 0.750 1645 5/16-24 CAD
CC-39S 2.438 3.750 3.219 0.875 2650 3/8-24 CAD
CC-40S 2.500 3.750 3.219 0.875 2660 3/8-24 CAD
CC-41S 2.563 4.000 3.469 0.875 2675 3/8-24 CAD
CC-42S 2.625 4.000 3.469 0.875 2690 3/8-24 CAD
CC-43S 2.688 4.000 3.469 0.875 2705 3/8-24 CAD
CC-44S 2.750 4.000 3.469 0.875 2715 3/8-24 CAD
CC-45S 2.813 4.250 3.719 0.875 2730 3/8-24 CAD
CC-46S 2.875 4.250 3.719 0.875 2745 3/8-24 CAD
CC-47S 2.938 4.250 3.719 0.875 2760 3/8-24 CAD
CC-48S 3.000 4.250 3.719 0.875 2775 3/8-24 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home