SC-S Clamp Collar

SC.GIF

Split Collars with locking screws were an outgrowth of threaded adjustable retaining devices made and used by precision instruments and machinery manufacturers in the early twentieth century.

These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or limiters. They become an easy way to create a shoulder eliminating the need to machine expensive keyways, splines and shoulders on rods, shafts, and spindles.

This model is a two piece double split design, made with austenitic corrosion resistant steel bright finished and austenitic stainless steel socket head cap screw.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Bore
(inches)
Outside Dia
(inches)
Face Dia
(inches)
Width
(inches)
Axial Load
(lbs)
Lockscrew
CAD
SC-02S 0.125 0.625 0.406 0.281 120 4-40 CAD
SC-03S 0.188 0.625 0.406 0.281 125 4-40 CAD
SC-04S 0.250 0.625 0.406 0.281 135 4-40 CAD
SC-05S 0.313 0.688 0.469 0.281 140 4-40 CAD
SC-06S 0.375 0.875 0.594 0.344 225 6-32 CAD
SC-07S 0.438 0.938 0.656 0.344 230 6-32 CAD
SC-08S 0.500 1.125 0.781 0.438 435 10-32 CAD
SC-09S 0.563 1.313 0.922 0.438 440 10-32 CAD
SC-10S 0.625 1.313 0.922 0.438 450 10-32 CAD
SC-11S 0.688 1.500 1.063 0.500 850 1/4-28 CAD
SC-12S 0.750 1.500 1.063 0.500 860 1/4-28 CAD
SC-13S 0.813 1.625 1.188 0.500 865 1/4-28 CAD
SC-14S 0.875 1.625 1.188 0.500 880 1/4-28 CAD
SC-15S 0.938 1.750 1.313 0.500 890 1/4-28 CAD
SC-16S 1.000 1.750 1.313 0.500 895 1/4-28 CAD
SC-17S 1.063 1.875 1.438 0.500 905 1/4-28 CAD
SC-18S 1.125 1.875 1.438 0.500 910 1/4-28 CAD
SC-19S 1.188 2.063 1.625 0.500 920 1/4-28 CAD
SC-20S 1.250 2.063 1.625 0.500 930 1/4-28 CAD
SC-21S 1.313 2.250 1.719 0.563 995 1/4-28 CAD
SC-22S 1.375 2.250 1.719 0.563 1005 1/4-28 CAD
SC-23S 1.438 2.375 1.844 0.563 1010 1/4-28 CAD
SC-24S 1.500 2.375 1.844 0.563 1020 1/4-28 CAD
SC-25S 1.563 2.375 1.844 0.563 1030 1/4-28 CAD
SC-26S 1.625 2.750 2.219 0.625 1535 5/16-24 CAD
SC-27S 1.688 2.750 2.219 0.625 1545 5/16-24 CAD
SC-28S 1.750 2.750 2.219 0.625 1555 5/16-24 CAD
SC-29S 1.813 2.875 2.344 0.625 1565 5/16-24 CAD
SC-30S 1.875 2.875 2.344 0.625 1575 5/16-24 CAD
SC-31S 1.938 3.000 2.469 0.625 1590 5/16-24 CAD
SC-32S 2.000 3.000 2.469 0.625 1600 5/16-24 CAD
SC-33S 2.063 3.250 2.719 0.750 1740 5/16-24 CAD
SC-34S 2.125 3.250 2.719 0.750 1755 5/16-24 CAD
SC-35S 2.188 3.250 2.719 0.750 1765 5/16-24 CAD
SC-36S 2.250 3.250 2.719 0.750 1775 5/16-24 CAD
SC-37S 2.313 3.500 2.969 0.750 1790 5/16-24 CAD
SC-38S 2.375 3.500 2.969 0.750 1810 5/16-24 CAD
SC-39S 2.438 3.750 3.219 0.875 2915 3/8-24 CAD
SC-40S 2.500 3.750 3.219 0.875 2925 3/8-24 CAD
SC-41S 2.563 4.000 3.469 0.875 2940 3/8-24 CAD
SC-42S 2.625 4.000 3.469 0.875 2955 3/8-24 CAD
SC-43S 2.688 4.000 3.469 0.875 2975 3/8-24 CAD
SC-44S 2.750 4.000 3.469 0.875 2985 3/8-24 CAD
SC-45S 2.813 4.250 3.719 0.875 3000 3/8-24 CAD
SC-46S 2.875 4.250 3.719 0.875 3020 3/8-24 CAD
SC-47S 2.938 4.250 3.719 0.875 3035 3/8-24 CAD
SC-48S 3.000 4.250 3.719 0.875 3050 3/8-24 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home